-
Home
- Storage Analyzer KM
Release Notes
This page lists the new features, improvements, changes and bug fixes in each version of Storage Analyzer.
Storage KM 1.6.00
8 Changes - Released 2023-11-10Changes and Improvements
| ID | Description |
|---|---|
| SKM-291 | Report thresholds via the "SKM_q; thresholdsReport(endpointList)" command |
| SKM-281 | Report Device Name in TrueSight/BHOM (MetaFQDN) via the "SKM_q; endpointsInfo()" command |
| SKM-277 | Web UI: Ability to enable debug for specific endpoints |
| SKM-272 | Debug logs are compressed by default at the end of debug window |
Fixed Issues
| ID | Description |
|---|---|
| SKM-289 | Incorrect thresholds are set on the Controllers' Status parameter |
| SKM-280 | Devices are no longer created in TrueSight because the endpoint's MetaFQDN is no longer set |
| SKM-276 | The Monitor Type of some PATROL classes' Containers are erroneously identified as Monitors instead of Containers |
| SKM-235 | Remove the Count parameter from the SKM_FILESYSTEM_CONT class |
Storage Intelligence 22
1 Changes - Released 2023-11-06What's New
| ID | Description |
|---|---|
| SI-296 | Added support for Dell EMC PowerMax v4 (REST) |
Storage Intelligence 21
1 Changes - Released 2023-10-16Changes and Improvements
| ID | Description |
|---|---|
| SI-311 | HPE Primera (WBEM): Added a new metric to report the Queue Length value for Storage Volumes |
Storage Intelligence 20
4 Changes - Released 2023-09-18What's New
| ID | Description |
|---|---|
| SI-268 | Added support for NetApp Filers based on ONTAP REST API |
| SI-267 | Added support for NetApp Filers based on Active IQ Unified Manager REST API |
Fixed Issues
| ID | Description |
|---|---|
| SI-301 | NetApp E-Series (REST): Some classes such as SKM_SYSTEM, SKM_PORT, SKM_CONTROLLER are not discovered or collected |
| SI-293 | Dell EMC VMAX (REST): Reported values for Configured Capacity and Subscribed Capacity metrics do not match the values displayed in the Unisphere UI |
Storage Intelligence 19
5 Changes - Released 2023-07-18What's New
| ID | Description |
|---|---|
| SI-278 | Added support for Fujitsu Eternus AF/DX series (REST) |
Fixed Issues
| ID | Description |
|---|---|
| SI-292 | Dell EMC ScaleIO (REST): Some capacity metrics are not collected for storage systems, storage pools and storage volumes |
| SI-285 | Dell EMC VMAX (REST) and Dell EMC Unity (REST): All volumes may not be collected |
| SI-282 | Dell EMC PowerStore (REST): Values for Configured Capacity and Subscribed Capacity metrics are missing |
| SI-279 | Huawei OceanStor (REST): Unable to collect data from physical disks with unknown type |
Storage Intelligence 18
1 Changes - Released 2023-05-11Fixed Issues
| ID | Description |
|---|---|
| SI-270 | Huawei OceanStor (REST): Missing devices reported due to expired token |
Storage KM 1.5.00
8 Changes - Released 2023-05-11Changes and Improvements
| ID | Description |
|---|---|
| SKM-264 | ClientTimeout default value is increased to 30 minutes |
| SKM-259 | Disable Missing Device Detection can be activated from a CMA policy |
| SKM-258 | Added two configuration variables to customize queries retry delays |
Fixed Issues
| ID | Description |
|---|---|
| SKM-262 | Vulnerability CVE-2021-44832 in SI Launcher |
| SKM-257 | An incorrect threshold is set on the Present parameter of Controllers |
| SKM-250 | Dell EMC VMAX (WBEM): Monitors are incorrectly attached to the SMI-S provider device instead of the storage system |
| SKM-243 | IBM DS888x (WBEM) and Dell EMC VMAX (WBEM): The Status parameter are always set to 1 (Degraded) |
| SKM-221 | Huawei OceanStor (REST): Missing and null objects are visible |
Storage Intelligence 17
6 Changes - Released 2023-04-14What's New
| ID | Description |
|---|---|
| SI-260 | Added support for Hitachi GUM (REST) |
| SI-242 | Added support for Scality Ring (REST) |
| SI-217 | Added support for Hitachi E Series (REST) |
Fixed Issues
| ID | Description |
|---|---|
| SI-269 | Dell EMC PowerStore (REST) stops working after the REST API is upgraded to v.3.x |
| SI-265 | Dell EMC Isilon (REST): Storage Pools IDs are not unique |
| SI-258 | Dell EMC VMAX (REST): Unisphere v10 is not supported |
Storage Intelligence 16
1 Changes - Released 2023-02-20Fixed Issues
| ID | Description |
|---|---|
| SI-262 | Dell EMC Isilon (REST): Volume IDs are not unique |
Storage Intelligence 15
3 Changes - Released 2023-01-19What's New
| ID | Description |
|---|---|
| SI-237 | HPE Primera (WBEM): Full support for HPE Primera and HP 3PAR StoreServ systems |
Changes and Improvements
| ID | Description |
|---|---|
| SI-207 | Dell EMC SC Series (REST): Added the possibility to migrate from Dell Compellent ETL to Storage All In One ETL |
Fixed Issues
| ID | Description |
|---|---|
| SI-240 | Dell EMC VMAX (REST): Connection times out while collecting volumes' metrics |
Storage KM 1.4.01
1 Changes - Released 2022-11-14Fixed Issues
| ID | Description |
|---|---|
| SKM-239 | Security vulnerability in Swagger UI (OpenAPI) when displaying the documentation through Monitoring Studio |
Storage Intelligence 13
1 Changes - Released 2022-11-10Changes and Improvements
| ID | Description |
|---|---|
| SI-236 | Dell EMC PowerVault (REST): Add the ability to enable hardware monitoring |
Storage KM 1.4.00
4 Changes - Released 2022-09-26Changes and Improvements
| ID | Description |
|---|---|
| SKM-231 | Operation timeout is now configurable via the SI Launcher |
| SKM-227 | Discovery timeout is customizable via the "endpointSiliciumLockTimeout" variable (Default increased to 3600 seconds) |
| SKM-226 | Pure Storage FlashArray Series (REST v2.4+): Added token authentication to enable Hardware monitoring |
| SKM-218 | Storage Analyzer KM now handles File Systems |
Storage Intelligence 12
11 Changes - Released 2022-09-22What's New
| ID | Description |
|---|---|
| SI-211 | Added support for Dell EMC PowerVault (REST) |
Changes and Improvements
| ID | Description |
|---|---|
| SI-226 | Dell EMC PowerStore (REST) and Dell EMC Unity (REST) require version 1.10.00 or higher of the Storage All-in-One engine |
| SI-215 | Pure Storage (REST): Capacity to manage environments with more than 500 monitored volumes |
| SI-201 | Dell EMC Unity (REST): Addition of new metrics for Storage Systems, Storage Pools and Storage Volumes |
Fixed Issues
| ID | Description |
|---|---|
| SI-229 | Dell EMC SC Series (REST): Data collect is stopped when the REST API encounters a volume with a missing name |
| SI-227 | Huawei OceanStor (REST): A NullPointerException is triggered when no iSCSI port is reported |
| SI-222 | NetApp E-Series (REST): Discovery failure caused by HTTPResponseException or JdbcSQLSyntaxErrorException |
| SI-221 | Dell EMC VMAX (REST): Controllers' Processor Utilization reports values higher than 100 % |
| SI-209 | Pure Storage FlashArray (REST v2.4+): "OutOfMemoryError: GC overhead limit exceeded" causes the data collect to fail |
| SI-206 | Dell EMC Isilon (REST): Processor Utilization (%) on Controllers reports values above 100 % |
| SI-195 | Hitachi G Series (REST): A NullPointerException is triggered when no iSCSI port is reported |
Storage Intelligence 10
3 Changes - Released 2022-03-23What's New
| ID | Description |
|---|---|
| SI-84 | Added support for Dell EMC PowerStore (REST) |
Fixed Issues
| ID | Description |
|---|---|
| SI-197 | Dell EMC VMAX (REST): Data collection for volumes may fail when multiple systems are attached to the same Dell EMC Unisphere |
| SI-191 | Dell EMC SC Series (REST): "HTTP Error 204"causes the adapter to stop discovering the Storage Systems |
Storage Intelligence 9
6 Changes - Released 2022-02-18What's New
| ID | Description |
|---|---|
| SI-190 | Added support for Dell EMC PowerFlex/ScaleIO (REST) |
| SI-180 | Added support for Dell EMC Unity (REST) |
Changes and Improvements
| ID | Description |
|---|---|
| SI-192 | H2 database upgraded from v1.4.199 to v2.1.210 |
| SI-186 | Jackson library upgraded to version 2.13.1 |
| SI-182 | Remote systems are no longer supported for Dell EMC VMAX/PowerMax (REST) |
Fixed Issues
| ID | Description |
|---|---|
| SI-179 | Dell EMC SC Series (REST): Port discovery fails due to an empty Speed string |
Storage KM 1.3.00
2 Changes - Released 2021-12-22Changes and Improvements
| ID | Description |
|---|---|
| SKM-216 | Log4Shell Vulnerability: Update log4j version to 2.17.0 in the troubleshooting tool |
| SKM-211 | Agent-side collection can be deactivated from the monitoring policy |
Storage Intelligence 8
6 Changes - Released 2021-08-26What's New
| ID | Description |
|---|---|
| SI-163 | Added support for Huawei OceanStor (REST) |
Changes and Improvements
| ID | Description |
|---|---|
| SI-176 | Replace Helix Capacity Optimization with Helix Continuous Optimization |
Fixed Issues
| ID | Description |
|---|---|
| SI-167 | Dell EMC SC Series (REST): Cannot connect directly to the Dell EMC SC Series systems |
| SI-166 | Hitachi G-Series (REST): Storage systems are not created as separate devices in TrueSight/Helix OM |
| SI-165 | Dell EMC VMAX (REST): Storage systems are not created as separate devices in TrueSight/Helix OM |
| SI-164 | Dell EMC VMAX (REST): Discovery fails when the number of volumes is lower than 1000 |
Storage Intelligence 7
1 Changes - Released 2021-04-22Changes and Improvements
| ID | Description |
|---|---|
| SI-160 | Ceph Adapter: Added Vendor information to the Storage System properties (Storage Box) |
Storage Intelligence 6
5 Changes - Released 2021-03-15What's New
| ID | Description |
|---|---|
| SI-129 | Added support for Pure Storage REST API v2.4+ |
| SI-107 | Added support for Dell EMC VMAX/PowerMax (REST) |
| SI-68 | Added support for Hitachi G Series (REST) |
Fixed Issues
| ID | Description |
|---|---|
| SI-149 | The Licence Count value for Dell EMC Isilon storage systems erroneously reports 0 |
| SI-132 | Ceph Adapter: Errors 400 cause the collect to stop |
Storage KM 1.2.00
7 Changes - Released 2021-03-15Changes and Improvements
| ID | Description |
|---|---|
| SKM-191 | The KM triggers an alarm on the Collection Status parameter when the Storage Intelligence Adapter and the KM versions are not compatible |
| SKM-177 | SKM is delivered with Storage Intelligence Library version 6 |
| SKM-175 | Ability to Hide Volumes |
| SKM-173 | Add API Token choice for Endpoint Connection Credentials |
Fixed Issues
| ID | Description |
|---|---|
| SKM-196 | Bad handling of white spaces in file paths prevents the KM to monitor Endpoints |
| SKM-187 | The Storage Intelligence Adapter for existing Endpoint cannot be changed |
| SKM-184 | Increased Port Number range in CMA Endpoint Policy |
Storage KM 1.1.00
13 Changes - Released 2020-11-04What's New
| ID | Description |
|---|---|
| SKM-138 | Integrate hardware monitoring through the Hardware Sentry KM |
Changes and Improvements
| ID | Description |
|---|---|
| SKM-160 | A specific Storage Intelligence Adapter can now be manually specified in the CMA interface |
| SKM-155 | The default content of the events generated upon storage alerts refers to the device to which the object is attached |
| SKM-152 | Instances of the SKM_SYSTEM class now create devices in TrueSight |
| SKM-144 | Enable hardware monitoring is on for v1.0.00 endpoints, while it is not |
| SKM-143 | Web UI: When editing an endpoint from console Enable Hardware Monitoring is not displayed |
| SKM-142 | Web UI: Indicate that hardware monitoring is not possible when the storage platform has no matching connector |
| SKM-141 | Web UI: Add a confirmation step before removing a host |
| SKM-140 | Add source KM name to the Hardware Sentry collection |
| SKM-139 | Automatic Hardware KM integration |
| SKM-99 | Integrate Storage Analyzer KM with Hardware Sentry KM |
Fixed Issues
| ID | Description |
|---|---|
| SKM-163 | Response Time parameter values not always accurate for Netapp-Solidfire-REST, DellEMC-VMAX-WBEM and IBM-DS8880-WBEM platforms |
| SKM-151 | Instance properties are not displayed in Monitoring Studio Web UI for SKM endpoints |
Storage Intelligence 5
13 Changes - Released 2020-11-03What's New
| ID | Description |
|---|---|
| SI-89 | Storage Intelligence Adapters contain hardware connector information in order to trigger hardware monitoring if configured by the user |
| SI-74 | New metrics added to Storage Intelligence Adapters |
Changes and Improvements
| ID | Description |
|---|---|
| SI-124 | Add support for IBM DS888x (WBEM) |
| SI-111 | Rename Red Hat Ceph (REST) to Ceph (REST) |
| SI-83 | NetApp SolidFire (REST): The controller's memory size should report the sum of all available memory values |
| SI-80 | Update Red Hat Ceph Adapter |
| SI-79 | Update Pure Storage Adapter |
| SI-78 | Update NetApp SolidFire Adapter |
| SI-77 | Update NetApp E-Series Adapter |
| SI-76 | Update Dell EMC XtremIO Adapter |
| SI-75 | Update VMAX Adapter |
| SI-37 | Add monitoring metrics in IBM DS 888x .si file |
Fixed Issues
| ID | Description |
|---|---|
| SI-55 | ScaleIO - Operations and Rate are not correcly computed |
Storage Intelligence 3
3 Changes - Released 2020-08-21Changes and Improvements
| ID | Description |
|---|---|
| SI-81 | Add support for Dell EMC ScaleIO (REST) |
| SI-53 | Add support for Dell EMC SC Series (REST) |
| SI-14 | Add support for IBM Spectrum Scale (REST) |
Search Results for {{siteSearch | truncate:'50'}}
{{resultArray.length}}
No results.